How To Clean The Tinted Windows In Your Home?

People have started the importance of the window film for home and commercial buildings. Just installing the films on the windows of your homes and offices is not sufficient. You need to maintain it by cleaning it regularly. You cannot clean it off with whatever you like and is available; you need to follow some rules. There are some tips that will allow you to do that safely. Here is the list of the tips.

• Do not use the strong chemicals like ammonia or anything abrasive like razor blades to clean the tinted windows in your home or office. Also, it is advisable keep the paper towels, newspapers, scrub pads and scrappers away from it. It may damage the windows badly or cause scratches to the glass.

• Instead, use soap and water or microfiber cloths and soft window cleaning towels to wipe it out. Select the best cleaning solutions which guarantees that the windows will not get damaged. Most of the window safety film suppliers have got these products; if they don’t you can buy from a different store.

• One of the most important tips is to clean it in the evening, not morning so that once it is cleaned it gets time to cool off. So, cleaning them in direct sunlight is not a good idea.

• One of the best methods is to fill up the cleaning solution into a spray bottle, spray it up on the outside surface of the window and then wipe it off into the circular motion with the folded cloth till that portion is neat. Repeat the same for all the sections. Then you can wipe them up with the dampen cloth so that the soap remains will get removed. Lastly, wipe with the dry cloth to make them dry. Repeat the entire process for the inside surface and you are done with the entire cleaning process for any kind like double glazing film for windows.

Read More

How To Install Window Films In Your Home?

Most of the people have realised the importance of the anti glare window films so they have started installing them in their house. As a result, many people are planning to set up their business. As the demand of such tints is increasing, the business will gain a huge profit.

Most of the companies sell anti shatter film for windows. Although they sell good quality products, but many of them only supply it; they do not provide the installation services. So, it is advisable for everyone to learn the installation process.

Whether a coloured window film or a simple one, it is not too difficult to install them. All you need to do is execute some of the easy to follow steps. Here is the complete procedure consisting of a few easy steps.

• Once you have selected the windows to tint and the films, the first step is to prepare the windows for tinting. Remove the dirt and the dust and wipe it off to make it as neat as possible.

• Once you have cleaned it, you need to take out the tape from the box, cut it out and apply it on the window. Start applying from the tape and then rub it down by applying the pressure using a cloth or a paper.

• Once you have applied the tape, you need to think how you will apply the film to it. Unfold the roll of the film a little along the width of the window. Do it systematically as it is slightly tough to unfold the sticky tint out of the roll.

• Now bring down the film from top to bottom in such a way that it gets attached to the window. Do unfold a few inches of film, peeling of the tape a little and sticking the film over it.

• Once you reach down and cover the entire window, trim of off the extra inches.

• Shrink it off and remove the wrinkles with the help of hair dryer.

Read More